HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

Hardware RAID

 
bchinnat
Frequent Advisor

Hardware RAID

I am having BL360c HP blade server which is Hardware raid( RAID 1+0). I had removed one disk and had done some activity on the first disk. Now I want to sync the second disk with the first one.

I don't have clear idea how this function and we can insert the disk while the system is up & running? or we need to down the server and do it?


Could I have some suggestion how to do it???

Thanks In Advance!!!!!
3 REPLIES
wobbe
Respected Contributor

Re: Hardware RAID

I can't really follow your question.

Did you remove one of the 2 disks, left the server running, did some work on the o.s. and now you want the to put the removed disk back?

I assume you have a smart array controller and hot pluggable disks. So when you put back the removed disk it will automatically start to rebuild with the disk still in the server.
This can all be done without shutting down the o.s.
bchinnat
Frequent Advisor

Re: Hardware RAID

Thanks for the reply..

Exactly my question is same. It is smart array controller.

So you mean to say we can directly insert the disk in the running system and it will automatically sync with the primary disk. Right???
wobbe
Respected Contributor

Re: Hardware RAID

Yes. A soon as you insert the second disk the smart array controller will start with the raid rebuild.