BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

How do I clear inforational alerts from the OBA?

 

How do I clear inforational alerts from the OBA?

The OBA is showing informational alerts saying that the VC is not configured. The VC is configured and working fine. There are no alerts in the VC manager.
These errors started showing up after upgrading the firmware on the VC and OBA.
How do I clear these informational alerts?

Thanks
Chris
9 REPLIES
Igor Karasik
Honored Contributor

Re: How do I clear inforational alerts from the OBA?

Try to do Power Off/Power On server - usually it help.
Make sure you have 2.13 OA firmware as well.

Re: How do I clear inforational alerts from the OBA?

My Firmware was at 2.12. I upgraded it to 2.13 and this did not fix the issue. I powered one of the bladed off and then back on, as suggested, and the informational is still there.
Any other suggestions?
I have included a screen shot.

Thanks

Chris
Raghuarch
Honored Contributor

Re: How do I clear inforational alerts from the OBA?

Hi Chris,

Try Reseting the OBA. it should fix the problem.

Regards,

Re: How do I clear inforational alerts from the OBA?

I reset both the primary and secondary OBA. The alerts did not clear.
HP_Sammy
Trusted Contributor

Re: How do I clear inforational alerts from the OBA?

Hello Chris,

To clear the list of all logged events, click the Clear button on the lower-right below the system log display.

Note : The System Log subcategory can be found within the Active Onboard Administrator category. The System
Log displays logged information of events within the Onboard Administrator.

Hope this helps.


Thanks regards
Sammy :)

Re: How do I clear inforational alerts from the OBA?

I cleared the logs by clicking the Clear button on the lower-right below the system log display, as directed. The logs cleared out, but the alerts are still there.
HP_Sammy
Trusted Contributor

Re: How do I clear inforational alerts from the OBA?

Hey Chris reseat the OA manually as well as try resttting it from the small button i front.

thanks regards
Sammy:)

Re: How do I clear inforational alerts from the OBA?

I found a solution, I did not re-seat the OBA. But I did power off asnd reseat the ininvidual blades. Then the errors cleared, one blade at a time as they were reseated.

Chris
HP_Sammy
Trusted Contributor

Re: How do I clear inforational alerts from the OBA?

Thats gr8 chris ur the maaaan :)