BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure Blade failover in C-Class

 
SOLVED
Go to solution
TarunJain
Respected Contributor

How to configure Blade failover in C-Class

Dear Gurus,
Please let me know how to configure a blade failover in C class server technology.
We would like to leave one blade as spare so that it can automatically take the place of any failed blade.
Enclosure: C7000
Blades: 460c
3 REPLIES
TarunJain
Respected Contributor

Re: How to configure Blade failover in C-Class

In p-classs that funcionality was available through RDP & CIM 7 integration & scripting.

Thanks a lot in advance for all persons who will help me out
TarunJain
Víctor Cespón
Honored Contributor
Solution

Re: How to configure Blade failover in C-Class

The situation keeps being the same, the blades are independent servers. You must use RDP to configure automatic installations and "rip and replace" scenarios.
One new thing that the c-Class has is virtual connect ethernet and fc modules. With them you can assign MAC and WWN per enclosure bay, independent of the blade there.
TarunJain
Respected Contributor

Re: How to configure Blade failover in C-Class

Hi vcespon ,
Thank you for your kind response.
Is there any reference document available to configure the blade failover in C class?

That would help a lot.
TarunJain