HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure Display with HP-UX 11.31

 
samrutia
Advisor

How to configure Display with HP-UX 11.31

Hi All,

How to set display on HP-UX?

I have tried following command.

set DISPLAY=:0.0
export DISPLAY=:0.0

xclock
Error: Can't open display: :0.0
Error: Couldn't find per display information

I am using putty to connect server.

How to find display information?

I am using windows xp and 2003 as desktop to connect server.

O.S Version: HP-UX B.11.31

Thanks in Advance
Sandeep.
7 REPLIES
samrutia
Advisor

Re: How to configure Display with HP-UX 11.31

Hi All,

how to check weather X server is running or not?

what is X server and how to start?

I think in our server X server is not running.

Regards,
Sandeep.
samrutia
Advisor

Re: How to configure Display with HP-UX 11.31

hi all,

xhost +
xhost:unable to open display "x.x.x.x:0.0"

please help me to resolve issue.

Thanks,
Sandeep.
Torsten.
Acclaimed Contributor

Re: How to configure Display with HP-UX 11.31

What Xserver do you run on your PC?

must be your PC.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
samrutia
Advisor

Re: How to configure Display with HP-UX 11.31

Hi,

We have a HP server. I am able to connet server via telnet and putty. I want to improt graphics on my desktop.how?

on linux server i can import graphics with set DISPLAY parameter but in HP it is not working.

Regards,
Sandeep.
Torsten.
Acclaimed Contributor

Re: How to configure Display with HP-UX 11.31

You need to run an XServer on your PC, e.g. xming.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrew Rutter
Honored Contributor

Re: How to configure Display with HP-UX 11.31

hi,

along with having Xserver application installed on pc, i use cygwin/X. also check that it the cde product set is installed on the server.

it is not installed by default with 11.31 so you may not even have desktop apps running ie cde?

you may need to install the cde bundle.

if it is installed and running then check the setting in your x app on pc.

Andy
Viveki
Trusted Contributor

Re: How to configure Display with HP-UX 11.31

Hi Sandeep,

Please find the administrator's Manual for CDE in the below URL:

http://docs.hp.com/en/B1171-90162/index.html

Also attached are the troubleshooting documnet for CDE issues