HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure RAID on BL490c with SATA SSDs?

 
Dirk Melchers
Occasional Contributor

How to configure RAID on BL490c with SATA SSDs?

Hi,

I'm trying to configure the pre-installed SSD drives into a RAID1 configuration on a BL490C. I was expecting to get a prompt to press F8 to enter the ORCA, but that's not the case as shown in the screenshot below. Does anybody have any idea how to get the volumes setup? The box itself is running ESXi.

Thanks in advance and best regards,

Dirk
2 REPLIES
JKytsi
Honored Contributor

Re: How to configure RAID on BL490c with SATA SSDs?

There is no Smart Array controller in BL490.
And no HW RAID can be configured. Only software mirroring what OS supports.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Dirk Melchers
Occasional Contributor

Re: How to configure RAID on BL490c with SATA SSDs?

Thanks for the quick response!