HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

How to do Vlan Tagging(Trunking) on HP GbE2c

 
Ankur Malla
Occasional Contributor

How to do Vlan Tagging(Trunking) on HP GbE2c

Hi,
We have C3000 with two ESX server configured on Bl460c g6 server. Whether HP switch can be configured as a trunk for achieving granularity of a single port. We need to route traffic between VMware guests OS which will be on different Vlans all together, and we want to achieve through a single NIC port, which in turn communicates to a single port on the switch. Pls. help me here to resolve this situation.
1 REPLY
Adrian Clint
Honored Contributor

Re: How to do Vlan Tagging(Trunking) on HP GbE2c

Check the forums on the switches themselves
http://www.bladeconnect.com/