HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

How to install bl860 & bl460 ?

 
nghiluu
Occasional Visitor

How to install bl860 & bl460 ?

Hello all,
I'v got 3 bl860c and 5 bl460c. But, i don't know how to install all above blades in to the Enclosure.
Please, show me where're the bl860c and the bl460c for position.
Thank you very much


LQNghi
3 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: How to install bl860 & bl460 ?

hi,

i don't see any problem, if you have cx7000 enclosure, there are 16 half size position or 8 full size positions, you need only enough power supplies installed inside the enclosure.

on this site you will find documentation for bl860c :

http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=3331044


mikap
Adrian Clint
Honored Contributor

Re: How to install bl860 & bl460 ?

Put the BL860 in the left hand slot
See pages 32-38 in the doc for how to remove the metal bracket
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00698286/c00698286.pdf

Put the BL460s in the top row starting at position 3.

The Brit
Honored Contributor

Re: How to install bl860 & bl460 ?

Be sure that you leave the "blanks" installed in bays which have no blade installed. Same is true for the Interconnect Bays.

Dave.