BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO Auto Login failed while taking IRC

 
ManjunathaGowda
Occasional Visitor

ILO Auto Login failed while taking IRC

Hello Experts,

While trying to take IRC of a blade the auto login is not working. I have 6 blades in the enclosure

One blade works fine

In this affected blade there is a exclamation mark and it shows (0.0.0.0)

Capture.PNG

But ILO Network default gateway settings in OA Network settings is correct and checked pinging from the machine where I logged into OA Console

Under Enclosure Bay IP Addressing apart from the working server bay as i mentioned above other blade "Current Address" shows "Unknown"

Things Already done:

After browsing in HP Forum done a reset of Virtual Buttons option in the OA 

How can I resolve this in remote rather than going to the server as it is located remotely

1 REPLY
msh_it
Regular Advisor

Re: ILO Auto Login failed while taking IRC

Try to apply the IPs in EIPA again, or reset the server physically or by using putty to OA "reset server baynumber"

this command will reboot the server

-------------------------------

msh_it | UAE | AbuDhabi

If you feel this was helpful please click the KUDOS! Below!