BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO Static IP got resetted automatically and changed to DHCP- Unknown reason

pandora_1
Frequent Advisor

ILO Static IP got resetted automatically and changed to DHCP- Unknown reason

Dear All,

I have few BL20p G3 Servers. All this are set with STATIC ILO IP Address and I have been using it frequently quiet long time. unfortunaltely all the ILO IP got resetted and got changed automatically to 0.0.0.0 and the DHCP also got enabled.Except for one or two systems. The firmare version of ILO is 1.89.
Any clue why this could happen ? and whats the remedy ? Now I have to connect the dongle and set a static IP manually.

regards
Azad
2 REPLIES
Raghuarch
Honored Contributor

Re: ILO Static IP got resetted automatically and changed to DHCP- Unknown reason

Try to asign the server bay 1 iLO ip using the dongle.

Login to the server 1 iLO: go to Click the BL p-Class tab; Click Static IP Bay Configuration from there you can Configure all the iLO IP's.
pandora_1
Frequent Advisor

Re: ILO Static IP got resetted automatically and changed to DHCP- Unknown reason

Thanks..

But could I know the reason why it has set all the ILO and the blade network switch IP's to 0.0.0.0

rgds
Az