ILO access becomes unavailable

[LRP]

Hi,
When i am accessing ILO from blades and loose comunications, when i try to connect again the message apears: "cannot connect to ilo. session is in use in a diferent session" and i can't access the blade's ilo unless i power it off, remove blade from bay and insert it again.
Can anyone help me? how can i access again to ilo without this procedure?

[William E Howard]

I've run into this before as well.

Easiest way to resolve this is to do a reset on the iLO. Its under Diagnostics I believe. After the reset you have to wait 60 seconds to get back in, but at least then you don't have to power down the blade.

[Víctor Cespón]

This can be done also from the operating system, with the hponcfg utility:

http://h18000.www1.hp.com/support/files/server/us/download/27968.html

http://h18004.www1.hp.com/support/files/server/us/download/27652.html

And the scripts that can be downloaded from:
http://h18023.www1.hp.com/support/files/server/us/download/21327.html

[James ~ Happy Dude]

Hello LRP,
Instead, you may try a much simpler way:

Login to the Web GUI of ilo & go to the remote console TAB; under SETTINGS, you have an "acquire" option; Enable it; This is used to FORCE disconnect sessions;

;) Regards.