BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO access becomes unavailable

LRP
Frequent Advisor

ILO access becomes unavailable

Hi,
When i am accessing ILO from blades and loose comunications, when i try to connect again the message apears: "cannot connect to ilo. session is in use in a diferent session" and i can't access the blade's ilo unless i power it off, remove blade from bay and insert it again.
Can anyone help me? how can i access again to ilo without this procedure?
3 REPLIES
William E Howard
Regular Advisor

Re: ILO access becomes unavailable

I've run into this before as well.

Easiest way to resolve this is to do a reset on the iLO. Its under Diagnostics I believe. After the reset you have to wait 60 seconds to get back in, but at least then you don't have to power down the blade.
Víctor Cespón
Honored Contributor

Re: ILO access becomes unavailable

James ~ Happy Dude
Honored Contributor

Re: ILO access becomes unavailable

Hello LRP,
Instead, you may try a much simpler way:

Login to the Web GUI of ilo & go to the remote console TAB; under SETTINGS, you have an "acquire" option; Enable it; This is used to FORCE disconnect sessions;

;) Regards.