BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Install blade c7000 chassis on digital rack

Jose A. Alonso Ortiz
Occasional Contributor

Install blade c7000 chassis on digital rack

hi all

one of our clients wants to re-use a Digital rack with round holes to hold a c7000 chassis.
He made it posible in other ocassion by using a piece (see attachment) to convert round holes into square holes. Anyone knows HP p/n of the piece or where can i find it?

thanks in advance
3 REPLIES
Adrian Clint
Honored Contributor

Re: Install blade c7000 chassis on digital rack

That number beginning 7 stamped on it is the HP metal work part number. But its not the sales part number. There may not be a sales part number as it may be part of a kit for something else.
You would have to go to HP...maybe you have to buy a kit to install something else and then just use these bits out of the kit.
WFHC-WI
Honored Contributor

Re: Install blade c7000 chassis on digital rack

Hi Jose,

I would ask HP about part number 332815-B21. This may be what you are looking for.

https://h10057.www1.hp.com/ecomcat/hpcatalog/specs/provisioner/99/332815-B21.htm

good luck
Jose A. Alonso Ortiz
Occasional Contributor

Re: Install blade c7000 chassis on digital rack

thanks. i´ll try that p/n