HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing RHEL4U4-64Bit on a BL460c

 
Ben Higginbottom
Occasional Contributor

Installing RHEL4U4-64Bit on a BL460c

Hi All,

We've just put in our first blade system, and after finally (we think) configuring the switch correctly I'm trying to install U4 via iLO.

However despite trying both NFS, FTP and HTTP installs the blade is unable to see the server.

Some people have suggested that because there is currently only one switch in the enclosure, the iLO is blocking the ethernet card, but that doesnt really ring true.

Does anyone know if there are any specific boot flags that need to be passed at startup?

The switch can see the relevant VLAN, the ports have been set to that VLAN and the blades MAC addresses are being seen on the other switches.

Any help would be much appreciated as this thing is driving me nuts.

Thanks,

Ben
2 REPLIES
Steven E. Protter
Exalted Contributor

Re: Installing RHEL4U4-64Bit on a BL460c

Shalom,

I don't buy the iLo issue.

Things to check:
1) Network connections, normal lights?
2) Switch port indicates link?
3) OS media. IA-64 for Itanium other media for non-itanium chips.
4) tcpdump on the network, to see if the system is even getting on the network. Watch for DHCP if relavent
5) See that your network configuration is compatible with your network. See if there is mac address filtering on the switch.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Ben Higginbottom
Occasional Contributor

Re: Installing RHEL4U4-64Bit on a BL460c

Boker Tov,

Its an internal port on the switch so there are no link lights, but OA shows everything green.

Media is X86_64 with a working boot.iso image from RedHat support (media supplied image has a number of bugs).

As for the switch configuration, well we can see the switch on the network, and see the blades MAC addresses which should indicate that its ok.

I'm trying to do a CD install via iLO, that should give me an OS on the inside of the switch so I can start debugging.

Thanks,

Ben