BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Insufficient enclosure power

Darin Clauson
Occasional Visitor

Insufficient enclosure power

My c3000 enclosure is stating Insufficient enclosure power for my 3 blades. This is a brand new enclosure fully populated with 6 fans and 6 power supplies. Again only 3 blades are in this enclosure and each one of them state insufficient enclosure power. I tried shutting down everything, and switching power to other PDU's without success. Even tried with one Blade and again no luck. All my other devices are green lighted.
4 REPLIES
raadek
Honored Contributor

Re: Insufficient enclosure power

Are you on the latest versions of firmware on EVERYTHING (blades, iLO chips, onboard admin)?
Don't panic! [THGTTG]
Raghuarch
Honored Contributor

Re: Insufficient enclosure power

Remove the OA board and Reinsert it. It should work fine.
If it Doesn't fix the problem Try
"Update device Tray" command from the OA CLI.

One of them should fix the Issue.

Re: Insufficient enclosure power

Also checking if the PS1 and PS4 have some problems should be useful if other advices aren't working. (maybe you can interchange them)

Check also if you ave not set a power limit in OA.
Raghuarch
Honored Contributor

Re: Insufficient enclosure power

Hi Darin,

Please post the Updates on this, Appreciate your time.... Thank you.

Regards,