BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Issue with Blade Chassis C3000, HP BL460c G9.

HappyAlexKG1
Occasional Visitor

Issue with Blade Chassis C3000, HP BL460c G9.

Hello

I have Blade Chassis C3000. I added 4 blades - BL460c G9.  All blades powered up without any issues. All this blades should  have access to MSA 2000 via FC. 3 of them having access to MSA2000, but one in BAY 3 do not have access

When i'm tring configure port on HP B-series 8/12c SAN Switch BladeSystem c-Class - i got:

----------------------------------------------------------------------------------------------------------------------------------

Error occurred while configuring the port 3 due to the following reasons  Error occurred while locking the port as E Port. Reason:Configuration operation is not supported on internal (server blade) port. 

-------------------------------------------------------------------------------------------------------------------------------

 

Here is screen from my C3000 - port mapping on Bay 3. All seems looks good

 

connect.PNG

 

Here is screen from HP B-series 8/12c SAN Switch BladeSystem c-Class. issue with port 3 - i;m not able to Enable it or Configure - error message  is 

-------------------------------------------------------------------------------------------------------------------------------

Error occurred while configuring the port 3 due to the following reasons  Error occurred while locking the port as E Port. Reason:Configuration operation is not supported on internal (server blade) port. 

-------------------------------------------------------------------------------------------------------------------------------

 

hp.PNG

 

Can you please help me ?

Thx

1 REPLY
peyrache
Respected Contributor

Re: Issue with Blade Chassis C3000, HP BL460c G9.

hello

shall you change port type please E port is for switch to switch connection

thanks

JYP