BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

LPe1205A FC Mezzanine - "No BIOS support"

 
SOLVED
Go to solution
PDP-Fan
Valued Contributor

LPe1205A FC Mezzanine - "No BIOS support"

I have a HP LPe1205A dual 8Gbit FC mezzanine which, when entered into the "CTRL-E" menu tells me that one of the cards has "No BIOS support".

According to the manual that means the boot BIOS has been disabled for this card. Unfortunately this cannot be changed in the card onboard utility.

Does anyone know which tool is necessary to reset that to default (BIOS enabled) settings? I have Win2008x64 on the blade.
I already tried a tool called "DOSLPCFG" but it turned out that the LPe1205 is not supported by that tool.

***********************************************
"If it seems illogical... you just don't have enough information"
1 REPLY
PDP-Fan
Valued Contributor
Solution

Re: LPe1205A FC Mezzanine - "No BIOS support"

Answer to myself: A firmware update cured the problem. Both HBAs are now "BIOS enabled"

***********************************************
"If it seems illogical... you just don't have enough information"