HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

LTO3 Tape Library, c7000 enclosure and bl860c blades

 
The Brit
Honored Contributor

LTO3 Tape Library, c7000 enclosure and bl860c blades

Does anyone know of a reason why I would not be able to see my LTO3 tape library from my BL860c blades. My SAN administrator tells me that they are properly presented to the WWIDs on my HBA's.

I have not had any issues seeing SAN Disks, only problem is with the Tape Library.

My blades are running OpenVMS 8.3-1H1. I was able to present the same library to a rackmounted rx3600 running OpenVMS V8.3 without any problem.

Is it possibly anything to do with NPIV?

Any thoughts would be welcome.

Dave.
2 REPLIES
The Brit
Honored Contributor

Re: LTO3 Tape Library, c7000 enclosure and bl860c blades

OK. Resolved it.

I had to run the "IO FIND_WWID" command from within the SYSMAN utility, followed by "IO AUTO"

Dave
The Brit
Honored Contributor

Re: LTO3 Tape Library, c7000 enclosure and bl860c blades

See above