HPE Community
BladeSystem - General
1752717 Members
5846 Online
108789 Solutions
New Discussion

Re: Lan in a BL460c

 
SOLVED
Go to solution
HEM_2
Honored Contributor

‎11-09-2007 06:15 AM

‎11-09-2007 06:15 AM

Re: Lan in a BL460c

Rick,

technically, it is the NICs that can only connect at 1000.

If you install a GBE2 or Cisco or VC in the enclosure, the downlink ports to the server bays will still only connect at 1000 but the copper uplink ports are 10/100/1000 and therefore can be linked to a 10/100 Mb switch.

Pass-thru modules just passively send the NIC signal path to an RJ45 - 1000 only

just FYI....
Reply
rick jones
Honored Contributor

‎11-09-2007 06:55 AM

‎11-09-2007 06:55 AM

Re: Lan in a BL460c

Thanks for the correction/clarification. I keep forgetting the nature of the internal links with all this newfangled blade stuff :)
there is no rest for the wicked yet the virtuous have no pillows
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.