HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Link down on eth0 on ProLiant BL480c G1server on c7000 enclosure

 
Aminuddin Abdul Aziz
Occasional Visitor

Link down on eth0 on ProLiant BL480c G1server on c7000 enclosure

Hi All, my customer has been experiencing a very strange abnormality whereby 2 of their ProLiant BL480c G1server on c7000 enclosure had link down on both eth0 on both servers at the same instance. These servers are connected to CISCO 3020 blade switch 1. We check around but no one seems to have a definite answer for this problem. Are there anyone who could have face a similar problem? We are running RedHat ES 4 2.6.9-67.ELsmp. Many thanks.