BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Looking for "HP 1/10Gb VC-Enet Module" firmware

 
SOLVED
Go to solution
NJK-Work
Honored Contributor

Looking for "HP 1/10Gb VC-Enet Module" firmware

Hello,

I am trying to determine if I have the latest firmware for the HP 1/10Gb VC-Enet Module Virtul Connect (and associated SAN module) installed. I have 2.32 and from what I can tell 2.34 is the lastest. I am confused because there is also a 3.15 version out there but I believe is for a different model (I think Flex-Connect???).

Does anyone know if 2.34 is the latest version?

Also, is this the correct order of updating:

1) Update server BIOS in all blades
2) Update server ILO in all blades
3) Update OA's firmware to version 3.21
4) Update VirtualConnect's firmware to version 2.34 (assuming that is the latest).

Thanks in advance for any help.
Nelson
6 REPLIES
The Brit
Honored Contributor

Re: Looking for "HP 1/10Gb VC-Enet Module" firmware

NJK-Work
Honored Contributor

Re: Looking for "HP 1/10Gb VC-Enet Module" firmware

Thanks.
cjb_1
Trusted Contributor
Solution

Re: Looking for "HP 1/10Gb VC-Enet Module" firmware

I update the ILO first (and separately from the bios update).

Be aware of the browser requirements for moving from 2.34 to 3.x virtual connect as it requires active x.
NJK-Work
Honored Contributor

Re: Looking for "HP 1/10Gb VC-Enet Module" firmware

Thanks.

Nelson
NJK-Work
Honored Contributor

Re: Looking for "HP 1/10Gb VC-Enet Module" firmware

Wierd - I was having this exact problem, and it first happened yesterday:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02720395&jumpid=em_alerts_us-us_Mar11_xbu_all_all_1162310_73799_bladesystem_critical_006_1

So I was all set to update all of our firmware, and then we got a notice from HP today about the above problem! What wierd timing. We have been running our configuration for a long time and never seen this problem before...and then the very next day HP sends out an alert on it.

Anyway - I removed the DNS settings and it fixed my problem. So I guess I am not updating my firmware now.

Closing the post...
Nelson

NJK-Work
Honored Contributor

Re: Looking for "HP 1/10Gb VC-Enet Module" firmware