BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Lots of error : Mgmt processor failed in blade XX

laurent49
Occasional Advisor

Lots of error : Mgmt processor failed in blade XX

I have C7000 with 6 BL460C.

I often have many BL460C in red
when watching ILO console :

Mesg : Mgmt Processor failed in blade XX

why ?
3 REPLIES
sblsbl312
Occasional Visitor

Re: Lots of error : Mgmt processor failed in blade XX

Make sure the iLo f/w are 1.35 and the OA f/w on at least 1.30. Also, if the enclosure is not on the Lan yet, take out the gateway address for the blades. PS: Pls let me know if there is a better fix.
Fabian Calvo
Advisor

Re: Lots of error : Mgmt processor failed in blade XX

As sblsbl312 mentioned, you need to update the iLO firmware to 1.35, however, the OA firmware should be updated to 2.02a, this problem was fixed on version 2.01 :)
James ~ Happy Dude
Honored Contributor

Re: Lots of error : Mgmt processor failed in blade XX

Hello,
Refer :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01113006

This is the ONLY revision available at this time.

Regards,
James.