cancel
Showing results for 
Search instead for 
Did you mean: 

MININT-JVC ?

Domenico Viggiani
Super Advisor

MININT-JVC ?

Hi,
I have a blade system c7000 with eight servers.
On the HP onboard administrator web page, I see a few installed servers with their real name, other with a serial number and others with MININT-JVC as name (among them, even one with an installed operating system).
What's the real meaning of MININT-JVC?
How can I rename to its real name?

Thanks
4 REPLIES
Cederberg
Honored Contributor

Re: MININT-JVC ?

Hey.. Thats a temporary name set by WINPE if i'm not misstaken.

You can try reseting the servers ILO or SSH/telnet to chassi and typ "reset server [baynumber] to reset the whole server (Like takinge the server out and insert it again)

One of the above should work..

//Cederberg
Steven Clementi
Honored Contributor

Re: MININT-JVC ?

If you are using RDP to install / manage your blades... that is the name (or part of it) that the blades get when they boot into WinPE while RDP is running a job on the server.

A power reset should fix the name, just make sure RDP is finished with any jobs for that blade.


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Domenico Viggiani
Super Advisor

Re: MININT-JVC ?

Yes, I'm using RDP/Altiris but there are no pending jobs. I tried also to "reset" server but not it keeps an OLD name, different from actual one.
Adrian Clint
Honored Contributor

Re: MININT-JVC ?

Upgrade the BIOS and ILO firmware - that will fix it.
You need to ensure that your BIOS, ILO and OA firmware are in a supported matrix.
This is typical indicator when they are not.