BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Management Console link to GbE2c

SOLVED
Go to solution
Ed Cox
Respected Contributor

Management Console link to GbE2c

Hi everyone,
Just curious if anyone knows why I can get a Management Console hyperlink to my Brocade SAN switch, but the Information display for the GbE2c only displays the link for port mapping and not a link to the Management Console. The GbE2c has an ip address I can hit thru a web page outside of the OA interface.
Thanks!
Ed
3 REPLIES
HEM_2
Honored Contributor
Solution

Re: Management Console link to GbE2c

Ed:

2 possibilities:

1) If you have an IP address on Interface 256 in the GBE2c, you must at least have firmware and boot version 1.1.0 or greater on the GBE2c switch for its port 19 (interface to the OA) to be active. Here are the links:
firmware:
http://h18023.www1.hp.com/support/files/server/us/revision/9527.html

boot:
http://h18023.www1.hp.com/support/files/server/us/revision/9528.html

OR

2) You have an IP address configured on an interface other than 256 in the GBE2c.

- In this case the OA will not see that interface. This is by design.


Ed Cox
Respected Contributor

Re: Management Console link to GbE2c

Thank you for responding so quickly... we'll take a look at your suggestions.

Ed
huesler
Occasional Visitor

Re: Management Console link to GbE2c

Hi

I have two GbE2c Switches with Firmware 1.0 and would like to upgrade to Version 2.0.6.
But i can't find Firmware 1.1 on the HP WEB site.
Where can i get Firmware 1.1?

regards
martin