BladeSystem - General
1748139 Members
3737 Online
108758 Solutions
New Discussion юеВ

Re: Memory Errors and degration on the BL685c G1 blades

 
jonny123
Occasional Advisor

Memory Errors and degration on the BL685c G1 blades

We are frequently getting memory errors on the BL685c G1 blades. Does anyone know of any issues with these memory modules or blades?

Corrected Memory Error threshold exceeded (System Memory, Memory Module 4)

7 REPLIES 7
Raghuarch
Honored Contributor

Re: Memory Errors and degration on the BL685c G1 blades

Corrected Memory Error Threshold Passed (Slot X, Memory Module Y)... ...
Corrected Memory Error Threshold Passed (System Memory)
Corrected Memory Error Threshold Passed (Memory Module Unknown)
Event Type: Correctable error threshold
Exceeded Action: Continue normal operation, and then replace the memory module during the next scheduled maintenance to ensure reliable operation.
jonny123
Occasional Advisor

Re: Memory Errors and degration on the BL685c G1 blades

the problem is we are getting a lot of these errors on many servers randomly.

is there a known issue with the blades?
Raghuarch
Honored Contributor

Re: Memory Errors and degration on the BL685c G1 blades

Just found this ... Not sure about know issues with Blades.

If the correctable memory error is false, the following error message will be displayed in the Windows event log and a corresponding SNMP trap (type 6029) will be forwarded to the connected service center; however, no memory event will be logged in the Integrated Management Log (IML):
Event ID 1071
System Information Agent: Health: Correctable memory error detected.
The errors have been corrected, but the memory module should be replaced.
[SNMP TRAP: 6029 in CPQHLTH.MIB]

Please refer to the below link for more details.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01202059&jumpid=reg_R1002_USEN
jonny123
Occasional Advisor

Re: Memory Errors and degration on the BL685c G1 blades

how do i know if the server has the AMP

Advanced Memory Protection (AMP)
Raghuarch
Honored Contributor

Re: Memory Errors and degration on the BL685c G1 blades

These options can be configured in ROM-Based Setup Utility (RBSU) by pressing F9 at POST. Within RBSU, select Advanced Memory Protection from the Main Menu.
Terence Tsao
Frequent Advisor

Re: Memory Errors and degration on the BL685c G1 blades

Hi Tdubb,
Are these memory error always indicate the same memory slot or ramdon slot in one server ?
These are pre-failure memory alert,call HP to replace these memories , if alert appears repeatable, please check system board condition.
Regards.

Terence
jamesvdm
Advisor

Re: Memory Errors and degration on the BL685c G1 blades

Should a blade keep running if experiencing this issue? My BL 685c would not boot the other day until I removed the affected memory and I'm wondering if that's a configuration problem.

Thanks,

James