HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Memory issue BL280c - DDR3 10600R

 
Kjetil Valhovd_1
Occasional Advisor

Memory issue BL280c - DDR3 10600R

I have a problem with mith my DDR-3 memory.
Its a DDR-3 PC3 10600R 1333, who runs at 1066.

Installed in a HP Bl280c G6-server which is brand new.
Is there a way to change the FSB-Mem ratio on server BIOS ? Or any other solution to what causes the problem.

Please advise anyone :-)

Thanks!
2 REPLIES
Viveki
Trusted Contributor

Re: Memory issue BL280c - DDR3 10600R

Hi,

The speed 1333 is supported setting in ROM based setup utility (RBSU).

Please refer page 20-21 in the below documnet:
http://h18004.www1.hp.com/products/quickspecs/13294_na/13294_na.pdf
Kjetil Valhovd_1
Occasional Advisor

Re: Memory issue BL280c - DDR3 10600R

Thanks a lot.
I will dig into this on monday.