Mezzanines for BL460c G8

[buzton]

Hello Everyone,

We have a 14 BL460c G8 blades, currently unused due to some re-organization.

We planning to use these blades for Horizon VDI. In that case, I'm trying to define what mezzanines I should buy as extentions.

My idea is:
(1) FlexLOM 536FLB (766491-B21)
(1) FlexFabric 534M (700748-B21)
(1) AMD FirePro S4000X (752424-B21)

I would be grateful if someone could verify that I can install all these three cards into one single BL460c G8 blade.

[Torsten.]

Google "BL460c Gen8 quickspec" and get a list of all supported cards.

[buzton]

HelloTorsten,

all part numbers has been taken from "BL460c Gen8 quickspec"

I'm just unsure that I can combine TWO given mezzanine cards in one blade.

May be I should choose another part numbers

[Torsten.]

I found 700748-B21 in the quickspec. I did not find 766491-B21.

I found 752424-B21 (graphics card) only in the workstation specs.

[buzton]

Sorry, that was a typo

I should say "FlexFabric 10Gb 2-port 536FLB Adapter (766490-B21)" not 766491-B21

I've found AMD FirePro S4000X here : http://www8.hp.com/h20195/v2/GetPDF.aspx/c04123202.pdf   page 27

I know that an option for WS460c, but due to BL460c and WS460c is nearly identical, I hope that AMD MXM will work for me.

[Torsten.]

Workstation and server are very similar, in fact you toggle a dip switch.

These parts should fit, but you need a second processor to make the second mezzanine work.

Take care, there are MXM and MXM mezzanine cards, you need the mezz, it looks correct.