HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Mezzanines for BL460c G8

 
buzton
Occasional Visitor

Mezzanines for BL460c G8

Hello Everyone,

We have a 14 BL460c G8 blades, currently unused due to some re-organization.

We planning to use these blades for Horizon VDI. In that case, I'm trying to define what mezzanines I should buy as extentions.

My idea is:
(1) FlexLOM 536FLB (766491-B21)
(1) FlexFabric 534M (700748-B21)
(1) AMD FirePro S4000X (752424-B21)

I would be grateful if someone could verify that I can install all these three cards into one single BL460c G8 blade.

5 REPLIES
Torsten.
Acclaimed Contributor

Re: Mezzanines for BL460c G8

Google "BL460c Gen8 quickspec" and get a list of all supported cards.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
buzton
Occasional Visitor

Re: Mezzanines for BL460c G8

HelloTorsten,

all part numbers has been taken from "BL460c Gen8 quickspec"

I'm just unsure that I can combine TWO given mezzanine cards in one blade.

May be I should choose another part numbers

Torsten.
Acclaimed Contributor

Re: Mezzanines for BL460c G8

I found 700748-B21 in the quickspec. I did not find 766491-B21.

I found 752424-B21 (graphics card) only in the workstation specs.

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
buzton
Occasional Visitor

Re: Mezzanines for BL460c G8

Sorry, that was a typo

I should say "FlexFabric 10Gb 2-port 536FLB Adapter (766490-B21)" not 766491-B21

 

I've found AMD FirePro S4000X here : http://www8.hp.com/h20195/v2/GetPDF.aspx/c04123202.pdf   page 27

I know that an option for WS460c, but due to BL460c and WS460c is nearly identical, I hope that AMD MXM will work for me.

 

Torsten.
Acclaimed Contributor

Re: Mezzanines for BL460c G8

Workstation and server are very similar, in fact you toggle a dip switch.

 

These parts should fit, but you need a second processor to make the second mezzanine work.

Take care, there are MXM and MXM mezzanine cards, you need the mezz, it looks correct.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!