HPE Community
BladeSystem - General
1753295 Members
6435 Online
108792 Solutions
New Discussion

Moving from 110V to 208V on a c3000 blade enclosure

 
SOLVED
Go to solution
Michael Dudzinsky
Occasional Advisor

‎01-28-2009 02:12 PM

‎01-28-2009 02:12 PM

Moving from 110V to 208V on a c3000 blade enclosure

I have a customer that has a c3000 blade enclosure running on 110V power. They want to know if they can move to 208 without shutting down the chassis. It seems reasonable since the power supplies are autosensing, but taking risks is not an option. They are running N+N with all six power supplies.
0 Kudos
Reply
1 REPLY 1
Raghuarch
Honored Contributor

‎01-29-2009 02:20 PM

‎01-29-2009 02:20 PM

Solution

Re: Moving from 110V to 208V on a c3000 blade enclosure

Yes you can Move without shutting down the chassis.

You will see some Alerts that Mixing the Power supplies is not recommended, Other then that there is no issues. Once you Move completely to 208V that Alerts will Clear from the OA.
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.