HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Moving from 110V to 208V on a c3000 blade enclosure

 
SOLVED
Go to solution
Michael Dudzinsky
Occasional Advisor

Moving from 110V to 208V on a c3000 blade enclosure

I have a customer that has a c3000 blade enclosure running on 110V power. They want to know if they can move to 208 without shutting down the chassis. It seems reasonable since the power supplies are autosensing, but taking risks is not an option. They are running N+N with all six power supplies.
1 REPLY
Raghuarch
Honored Contributor
Solution

Re: Moving from 110V to 208V on a c3000 blade enclosure

Yes you can Move without shutting down the chassis.

You will see some Alerts that Mixing the Power supplies is not recommended, Other then that there is no issues. Once you Move completely to 208V that Alerts will Clear from the OA.