BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

NIC teaming on BL460G7 with W2008 R2

Jesper Taanum-Willumsen
Occasional Contributor

NIC teaming on BL460G7 with W2008 R2

I cannot install the cp012994 HP Network Configuration Utility for Windows Server 2008 x64 Editions Package on a W2008R2. Teh Os is not supported. The cp012994 is ver. 10.10.0.0. I have heard that there is a version 10.10.0.11 but it is no where to be found.

As it is now I cannot team the network cards on that server. Is there a solution to this?

Jesper
4 REPLIES
S_Logan
HPE Pro

Re: NIC teaming on BL460G7 with W2008 R2

Hi Jesper,

I understand your system is BL460G7 with Windows Server 2008 R2.

Please check the following and try installing the cp012995.exe (for Windows Server 2008 R2)


HP Network Configuration Utility for Windows Server 2008 R2
Type: Driver - Network
Version: 10.10.0.0 (9 Sep 2010)
Operating System(s): Microsoft Windows Storage Server 2008 R2
File name: cp012995.exe

This package contains the teaming and configuration utility for HP ProLiant NICs running under Microsoft Windows Server 2008 R2.
This utility allows you to configure and manage fault-tolerant teams of adapters installed in ProLiant servers.

Regards,
Surendar

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!
Jesper Taanum-Willumsen
Occasional Contributor

Re: NIC teaming on BL460G7 with W2008 R2

Hi

Thanks for the reply. This solves my problem.

Jesper
Jesper Taanum-Willumsen
Occasional Contributor

Re: NIC teaming on BL460G7 with W2008 R2

The cp012995 solved the issue.

Jesper
S_Logan
HPE Pro

Re: NIC teaming on BL460G7 with W2008 R2

Hi Jesper,

Thank you very much for the update.

Could you please check the following FAQs for Assigning Points.

http://forums11.itrc.hp.com/service/forums/helptips.do#33

Regards,
Surendar
I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!