HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Need 60 AMP 3-Phase PDU with 8-12 C-19 receptacles

 
Dale Howard
Occasional Contributor

Need 60 AMP 3-Phase PDU with 8-12 C-19 receptacles

to connect a C7000 chassis to a generic rack.
2 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: Need 60 AMP 3-Phase PDU with 8-12 C-19 receptacles

hi,

check this docu its related to your question :

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01543629/c01543629.pdf

this a great utility :

HP BladeSystem Power Sizer

http://h71019.www7.hp.com/ActiveAnswers/cache/347628-0-0-0-121.html


mikap
Andrew Rutter
Honored Contributor

Re: Need 60 AMP 3-Phase PDU with 8-12 C-19 receptacles

hi,

details of the supported pdu's should be here,

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01543629/c01543629.pdf

and also see this advisory notice

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00801457〈=en&cc=us&taskId=101&prodSeriesId=1844065&prodTypeId=329290


Andy