HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Network lost connectivity after reboot ESX 4.0 on BL680c G5

 
Thaufik
Occasional Advisor

Network lost connectivity after reboot ESX 4.0 on BL680c G5

HI All,

I have Blade Server BL680c G5 installed ESX 4.0,
when i've finished the installation ESX and ip address for service console was finished configure,i can ping to the other esx and i can login use vsphere..
when i reboot the server and ready to start up, server has lost connection and cannot be pinging to the other server..

any solution for this problem??



Thank's n Peace

Thaufik
Thanks & Peace

Thaufik Jonhar
4 REPLIES
Jan Soska
Honored Contributor

Re: Network lost connectivity after reboot ESX 4.0 on BL680c G5

Hello,
when you use ilo to get to local console, there is no IP defined in service console?
Do you use static IP with everyhning - subnet, gateway etc..?

Jan
Thaufik
Occasional Advisor

Re: Network lost connectivity after reboot ESX 4.0 on BL680c G5

Yes, i have use static ip for service console and i was change the ip address, but after ESX restart problem still unsolved..

Any solution???



Thank's Before
Thanks & Peace

Thaufik Jonhar
Jan Soska
Honored Contributor

Re: Network lost connectivity after reboot ESX 4.0 on BL680c G5

Hello I am afraid I simply do not understand you.
I you have static IP, it can not disapear..

Jan
Thaufik
Occasional Advisor

Re: Network lost connectivity after reboot ESX 4.0 on BL680c G5

Hi,

i've success installation the blade server, finally i'm try to power off the virtual connect active and then back to power on,
i assumsed this problem any on the firmware not compatible.


Thank's for your help

Thanks & Peace

Thaufik Jonhar