BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

No FC HBA on my BL460c Gen6 with VC FlexFabric 10Gb/24-Port Module

 
SOLVED
Go to solution
mc21_hp
Advisor

No FC HBA on my BL460c Gen6 with VC FlexFabric 10Gb/24-Port Module

I have a C7000 chassis configured as follow:

Device Bay 8: BL460c Gen6 with HP BLc Emulex LPe1205-HP 8 Gb/s FC HBA (P/N 456972-B21). It is compatible mezzanine card from manual "HP Virtual Connect and Networking for BladeSystem"

Interconnect Bay 3 : HP VC FlexFabric 10Gb/24-Port Module (firmware 4.50 P/N 571956-B21) with port X1: 8GB FC - HP AJ716B (representing Fabric_3)
Interconnect Bay 4 : HP VC FlexFabric 10Gb/24-Port Module (firmware 4.50 P/N 571956-B21) with port X2: 8GB FC - HP AJ716B (representing Fabric_4)

I want to add two FC HBA connections to blade server from VC. In "Virtual Connect Configuration Tutorial" https://www.youtube.com/watch?v=84ujPXaO8Hk (time 00:30:30) I saw "FC HBA Connections" in server profiles.

But when I'm creating server profiles in Virtual Connect Manager web interface, I can see and add only "Ehernet Adapters Connections", "iSCSI HBA Connections", "FCoE HBA Connections". There is no option to add "FC HBA Connections".

How can I add FC HBA Connections? Where is it?

 

4 REPLIES
peyrache
Respected Contributor
Solution

Re: No FC HBA on my BL460c Gen6 with VC FlexFabric 10Gb/24-Port Module

Hi
Flexfabric 10/24 use only FCOE on downlink nor pure FC
JY
mc21_hp
Advisor

Re: No FC HBA on my BL460c Gen6 with VC FlexFabric 10Gb/24-Port Module

It's not good. Does it support pure FC on uplink?

peyrache
Respected Contributor

Re: No FC HBA on my BL460c Gen6 with VC FlexFabric 10Gb/24-Port Module

yes

jy
mc21_hp
Advisor

Re: No FC HBA on my BL460c Gen6 with VC FlexFabric 10Gb/24-Port Module

Many thanks.