HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

No link coming on Fiber Interconnect Modules BL20P G4 Server

 
Kritao
Regular Advisor

No link coming on Fiber Interconnect Modules BL20P G4 Server

Hi,

We have 4 BL20P G4 Servers, with 2 nos., of HP Gbe2 Switches on each side. Behind the enclosure we have four Interconnects two with RJ45 Connection and Two with Fiber connectivity. Unfortunately, the fiber link is not getting enabled even after connecting the cable to san switch and interconnects. Each server has the Mezzanine card installed, also the drivers has been installed. One symptom I can found is fault LED on Managment module is glowing in RED color,
I tried replcing the Managment module and also I have restarted the full enclosure.
Can anybody help.
1 REPLY
Oleg Koroz
Honored Contributor

Re: No link coming on Fiber Interconnect Modules BL20P G4 Server


check for Fibre Channel Signal Conditioning Card
page 3

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00424289/c00424289.pdf