BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Not able to install HP-UX 11.31 on BL860C

SOLVED
Go to solution
Syedfurquan
Trusted Contributor

Not able to install HP-UX 11.31 on BL860C

Hello Expert,

 

I am trying to install hp-ux 11.31 on bl860C integrity server.

I am login through serial on MP and trying to install teh OS from media using external dvd drive.

 

But at the EFI shell I am not getting disk detected itself:

blk0:\> map -r
Device mapping table
  blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)

 

I tried reconnecting but still getting same o/p

 

Please guide me how to proceed from here.

Atatching drivers and devices O/P for reference.

 

Many thanks in advance for any help.

 

Regards

Regards,
Syed
2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: Not able to install HP-UX 11.31 on BL860C

This could be a problem with your DVD drive or media.

 

Try if vMedia works for you.

 

You may also try to connect the drive not to the SUV cable, but to the OA.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Syedfurquan
Trusted Contributor

Re: Not able to install HP-UX 11.31 on BL860C

Hi Torsten,

 

Thanks for the  response. It looks the issue was with the external DVD drive. Tried to install using the virtual media using OA and worked fine for me.

 

Thanks for all your support... :-)

 

Regards

Regards,
Syed