HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

OA 1.3 fan running @ 90%

 
David Christie_1
Occasional Contributor

OA 1.3 fan running @ 90%

upgraded OA from 1.2 to 1.3, fans went from ~40% to 90% speed.

All blades (windows) with PSP 7.60

If I upgrade PSP to 7.70 will the fans return to normal speed with 1.3 installed ?

thanks
3 REPLIES
Adrian Clint
Honored Contributor

Re: OA 1.3 fan running @ 90%

I would failover the OA if you have one.

If you just have one - then do a physical removal and replace.
Jeff Allen_5
Valued Contributor

Re: OA 1.3 fan running @ 90%

If any of your blades are powered off, turn them on and let them complete POST and then power them down. We are unable to collect thermals on blades that do not complete POST.
Rich Olson
Occasional Advisor

Re: OA 1.3 fan running @ 90%

refer to Jeff's last post. That is your issue and resolution. I had a customer with the same issue and this is how we fixed it.