BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

OA AND ILO network related issue

 
vignesh2004
Occasional Visitor

OA AND ILO network related issue

Goodday everyone,

I have this small problem that I'm still facing..

 

My chassis network setup is something like this.

I have two cisco L2 switches connected to my two HP chassis switches, The OA is connected to the first cisco switch ( C-1)

Now my problem is this,

I can ping the ILO ip's from my servers,from outside the network via the router etc, however I'm unable to ping it from JUST the blade switch, I can ping the OA but not any of the ILO IP's

This is really weird for me, can someone please explain?

 

Thanks a ton in advance,

Vignesh 

3 REPLIES
vignesh2004
Occasional Visitor

Re: OA AND ILO network related issue

Anyone with any kind of solution?
Robert_Jewell
Honored Contributor

Re: OA AND ILO network related issue

Are your iLO IP's configured inthe OA's EBIPA? Check under Enclosure Settings from the OA.

-Bob
----------------
Was this helpful? Like this post by giving me a thumbs up below!
vignesh2004
Occasional Visitor

Re: OA AND ILO network related issue

Hi Bob,

Yeah I can see my ILO IP's there complete with the gateway too..

THanks in advance for anyother help you can offer

 

Vignesh