HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

OA on c3000 enclosure thru GbE2c Layer 2/3 Eth. Sw.

 
SOLVED
Go to solution
Gonzalo López
Occasional Contributor

OA on c3000 enclosure thru GbE2c Layer 2/3 Eth. Sw.

The HP GbE2c Layer 2/3 Ethernet Blade Switch for c-Class BladeSystem User Guide states that "Port 19 is reserved for connection to the Onboard Administrator module for switch
management. This allows a user to enable the functionality of future firmware upgrade
releases."

Actually I am using a patch cable to connect the OA (port 3) to the GbE2c (any port from 20 to 24). What are the steps to enable "internal" connectivity between OA and the GbE2c?

Thanks in advance.

Regards.
2 REPLIES
Patrick Terlisten
Honored Contributor
Solution

Re: OA on c3000 enclosure thru GbE2c Layer 2/3 Eth. Sw.

Hello,

AFAIK this isn't possible at this moment. Maybe it will be enabled by a future firmware release.

Regards,
Patrick
Best regards,
Patrick
Gonzalo López
Occasional Contributor

Re: OA on c3000 enclosure thru GbE2c Layer 2/3 Eth. Sw.

Thanks.