BladeSystem - General
1748106 Members
4905 Online
108758 Solutions
New Discussion юеВ

OA update - iLO2 boards having problems

 
JorisK
Regular Advisor

OA update - iLO2 boards having problems

Hi everyone,

We have a Blade c7000 enclosure filled with 16 blades. A few weeks ago i updated the blades:

- iLO2 board firmware to version 1.5
- SmartArray E200 firmware to version 1.78
- Broadcom NIC to firmware 2.1.2
- Qlogic HBA to firmware 2008.07.25

After that, i updated the OA firmware from version 1.08 to version 2.25. Now i have the following problem; every blade reports iLO connection problems. When opening an blade in my device bay list the iLO board reports "iLO network configuration problem, check connectivity to iLO default gateway"

When trying to connect to the iLO board, nothing happens.

Anyone here that can help me?

Regards,
Joris
4 REPLIES 4
JKytsi
Honored Contributor

Re: OA update - iLO2 boards having problems

reset OA
check
reset ILO's
check
double check

If nothing else helps
SSH to OA
reset server [bay number]
this will do a total power reset to blade
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Terri Harris
Honored Contributor

Re: OA update - iLO2 boards having problems

With OA 2.25 the iLo2 needs to be a minimum of 1.60 (see table at the bottom of this web page):

http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html#1

Did you flash the OA from 1.08 (I don't even remember that old revision) directly to 2.25? Is the OA (both of them) really at 2.25?

If the OA has been flashed successfully and iLO 1.60 or higher doesn't fix it, how are the iLO IP addresses being assigned? By EBIPA (Enclosure Bay IP Addressing)?

Note: I agree with suggestion to reset iLO and OAs.

Otherwise I would recommend clearing the EBIPA settings and redoing them under the new OA.
JKytsi
Honored Contributor

Re: OA update - iLO2 boards having problems

Actually we have ran ILos fw 1.50 without problems with OA 2.25
But using the latest is usually a best practice...afterall updating ILO fw will do a reset to ILO and your problem might be solved =)
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
JorisK
Regular Advisor

Re: OA update - iLO2 boards having problems

Hi everyone,

It just took some time... after 15 minutes all iLO's came back.

Things work properly now :)

Thanks for the replies.