HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Onboard Administrator hardware revisions

 
WFHC-WI
Honored Contributor

Onboard Administrator hardware revisions

Are there any potential issues running an active Onboard Administrator with hardware revision B1 next to a standby Onboard Administrator with hardware revision A1? What if I fail over so that the Active and Standby OAs' revisions are reversed?

Thanks in advance for your help.
3 REPLIES
Jack00
Advisor

Re: Onboard Administrator hardware revisions

Hi,

There isn't any conflicts between the revision, the standby-to-active is based on the firmware revision installed on the ROM itself.

We currently have the same exact scenario that we use for testing purposes with no issues whatsoever.



Jack
WFHC-WI
Honored Contributor

Re: Onboard Administrator hardware revisions

Thanks Jack. I was hoping for that answer. :)

Do you have any information on what changed between the two hardware revisions?
Jack00
Advisor

Re: Onboard Administrator hardware revisions

Not at the moment, and I am not aware of public information. But they can be combined with no issues and will support all of the FW revisions and Interconnect options.