HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Online RM flash upgrade goes on forever

 
Anna Cheng
Advisor

Online RM flash upgrade goes on forever

I am in the process of upgrading my BL690c to 09/23/2008.
Similar to what I did for the other systems, I ran "sh CP009782.scexe"

As usual, it responded by
...
Current Version: 02/13/2008
Do you want to upgrade the software to a newer version (y/n) ?y
Flash in progress do not interrupt or you system may become unusable.
Working .....................................................................................................

It has run for over 20 minutes already, I have a feeling that it will never end. Obviously, I cannot interrupt. I use the same procedure and the same file to upgrade more than 20 blades already, In fact, this is the last one.

What can I do? any suggestion will be appreciated.
1 REPLY
Anna Cheng
Advisor

Re: Online RM flash upgrade goes on forever

Eventually it rebooted without upgrading the firmware.
When it came back up, I re-copied the firmware, re-installed again. It has now been upgraded.

I assumed my earlier version was corrupted.