HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

P class RJ-45 Patch Panel

 
SOLVED
Go to solution
C Yates
Advisor

P class RJ-45 Patch Panel

Does anyone know if the above supports g/b? We have a number of older enclosures with BL20p's (G2 and G3) all currently 100m/b and want to push g/b to some of them.
2 REPLIES
Rob Leadbeater
Honored Contributor
Solution

Re: P class RJ-45 Patch Panel

Hi,

Yes it does if I recall correctly.
The patch panels just route the internal NICs out to RJ45. The NICs on the BL20pG2 and G3 are all Gigabit so they should be able to link up at Gb.

This document explains things well...

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00429271/c00429271.pdf

Regards,

Rob
C Yates
Advisor

Re: P class RJ-45 Patch Panel

Thanks Rob.