BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Pluging the Brocade 8Gb SAN Switch for HP BladeSystem c-7000

SOLVED
Go to solution
hrvoje29
Occasional Contributor

Pluging the Brocade 8Gb SAN Switch for HP BladeSystem c-7000

Hello,

I have c-7000 up and running with 6 blade servers and 3 blade storages. Everything is already in production. All I can find in installation guide is that the Brocade 8Gb SAN Switch is a hot-pluggable device and now I just want to be sure that if I plug in the san switch it will not interfere with running configuration. Can someone please confirm?

Thank you. Regards,

H.

2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: Pluging the Brocade 8Gb SAN Switch for HP BladeSystem c-7000

plug in is not a problem, pull out can be a problem, once in use...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
hrvoje29
Occasional Contributor

Re: Pluging the Brocade 8Gb SAN Switch for HP BladeSystem c-7000

Thank you Torsten,

It went well :)