1745875 Members
4267 Online
108723 Solutions
New Discussion

Port Mapping

 
Clent Kesey
New Member

Port Mapping

How do I map more than 2 Ethernet ports to a single ProLiant BL460c server???

I have 4 1Gb Ethernet Pass-Thru Modules installed. The first two have two connections to each blade. However the two modules installed in 5/6 do not have any ports mapped.
1 REPLY 1
Sivaramakrishna_1
Honored Contributor

Re: Port Mapping

The Port Mapping is Fixed nd we can't map.

The on-Board Ports will map to Interconnect 1 and 2

Mezz 1 Ports mapped to inteconnect 3 and 4
Mezz 2 ports mapped to interconnect 5 and 6. If the card in this slot is having 4 ports 2 ports will map to 5 and 6 and remaining 2 map to interconnect 7 and 8.

So check any Network Mezz card installed in your server. Adjust the Interconnect modules based on the location of that mezz card.

You can see the port mapping once log into OA.