BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Power Enclosure AC Problem

Yvette McGlawn
Occasional Contributor

Power Enclosure AC Problem

I have been receiving the following events from our blade servers. Was told that I would need to upgrade my firmware. Not sure what version I am currently on and were to locate the latest version and how to upgrade without effecting my users:
"Power enclosure AC power problem (power supply 3, reason: ac power loss, enclosure serial number XXXXXx)" "rack power supply degraded" any advise would be greatly appreaciated. thanks in advance
2 REPLIES
MELKI
Occasional Advisor

Re: Power Enclosure AC Problem

Upgrading the OA firmware does not impact servers in the enclosure.

You have to apply the Firmware OA 2.25 (or more) to resolve the main known bugs.
Raghuarch
Honored Contributor

Re: Power Enclosure AC Problem

Login to OA and check the Powersupplies.

Please refer to below CUSTOMER ADVISORY:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01519680

incase its a different Problem Please Post what is the OA version?