BladeSystem - General
1748051 Members
5297 Online
108758 Solutions
New Discussion юеВ

Re: Power Options on P-Class Blade Server Enclosure

 
SOLVED
Go to solution
Tom Lawicki
Occasional Contributor

Power Options on P-Class Blade Server Enclosure

I have been presented with the following:
- p-Class Enclosure
- 6 HP BL20p servers
- 2 BL G-BE2 interconnect switches
and a 1u Rack mount PDU with 6 modules without any means of powering it up, which is where the problem is. What is the best method of supplying power to the PDU.
6 REPLIES 6
Michal Kapalka (mikap)
Honored Contributor

Re: Power Options on P-Class Blade Server Enclosure

hi,

usually the PDU is designed to be powered from the UPS.

mikap
Tom Lawicki
Occasional Contributor

Re: Power Options on P-Class Blade Server Enclosure

The UPS i haven't been given. Could I plug power cables straight into the back of the PDU? if so what would you recommend until i got a UPS. This is the first Blade setup i have encountered so apologies if the questions appear somewhat simple.
Michal Kapalka (mikap)
Honored Contributor

Re: Power Options on P-Class Blade Server Enclosure

Hi Tom,

you don't need to apologize, this is a normal and practical question.


Check this link :

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00816246/c00816246.pdf

page 25/26 there are another posibility how to connect the blade to the power.

hope it will help.

best regards.

mikap
Tom Lawicki
Occasional Contributor

Re: Power Options on P-Class Blade Server Enclosure

Michal,
Thanks for the link, it was helpful. So i could just plug in a single phase power source into the 6 sockets at the rear of the PDU?
Unless you could recommend a UPS that would be suitable.

Thanks again
Michal Kapalka (mikap)
Honored Contributor
Solution

Re: Power Options on P-Class Blade Server Enclosure

hi Tom,

So i could just plug in a single phase power source into the 6 sockets at the rear of the PDU?

- yes, this is possible, and many companies using this option

Unless you could recommend a UPS that would be suitable.

- in our racks from HP we have :

HP Rack-Mountable R5500 UPS - the quick spec you will find in the attachment of tis message.

- but this UPS is only for temporary outage of the main power supply, we have also centralized UPS, and diesel generator, for the hole Datacenter.

- in some other racks we have APC ups, but finaly its not so mather wich vendor you will use. The importants option is the posibility to connect your blade or PDU.

mikap



Thanks again
Tom Lawicki
Occasional Contributor

Re: Power Options on P-Class Blade Server Enclosure

I think that your most recent reply 'has hit the nail on the head'.

Thank you for your time in helping me to resolve this issue.

Tom