BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Power Supply Status Unknown

 
Highlighted
Honored Contributor

Re: Power Supply Status Unknown

Try swopping the PSU with the one in slot 1.

PSU 6 will be the last one to turn on when in any sort of power saving mode.

Does the problem move with the PSU?
Highlighted
Occasional Advisor

Re: Power Supply Status Unknown

I'll try the swap and see if it comes up. It is very intermittent though so it may be a while before I get any notification.
Highlighted
Honored Contributor

Re: Power Supply Status Unknown

Hi,

after swapping did the error move with the PSU and did the firmware update to 2.04 solve the problem?

Regards,
Pac
Highlighted
Occasional Advisor

Re: Power Supply Status Unknown

I upgraded all my enclosures to 2.04 and have not seen this error since. Here's hoping that resolved it.
Occasional Advisor

Re: Power Supply Status Unknown

One of the regional HP Sales guys told me that the newest firmware would fix it. I'm also going to upgrade our chassis and see what happens.