BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Power failure on C3000

Harritz
Occasional Visitor

Power failure on C3000

Hi

I've had a power failure on my C3000. Im not sure which power supply failed or why.

Here's the information i get from the SNMP traps:
[root@nagios bektra07]# /usr/local/nagios32/libexec/check_hp_bladechassis -H 192.168.238.10 -C public -p -d
System: BladeSystem c3000 Enclosure
ServiceTag: CZC8350L55
Firmware: 2.32
-----------------------------------------------------------------------------
System Component Status
=============================================================================
STATE | PART NO. | MESSAGE TEXT
---------+----------------+--------------------------------------------------
CRITICAL | 437504-B21 | Enclosure overall health condition is Failed
OK | 448589-B21 | Enclosure management module 1 is Active, status is Ok
OK | 412140-B21 | Fan 1 condition is Ok (present)
OK | 412140-B21 | Fan 2 condition is Ok (present)
OK | 412140-B21 | Fan 3 condition is Ok (present)
OK | 412140-B21 | Fan 4 condition is Ok (present)
OK | 412140-B21 | Fan 5 condition is Ok (present)
OK | 412140-B21 | Fan 6 condition is Ok (present)
OK | 459486R-B21 | Blade 1 is a ProLiant BL460c G1 with name: vmwareesxi01
OK | 435458-B21 | Blade 2 is a ProLiant BL460c G1 with name: XenServer01
OK | 435458-B21 | Blade 3 is a ProLiant BL460c G1 with name: XenServer02
OK | 435458-B21 | Blade 4 is a ProLiant BL460c G1 with name: XenServer03
OK | 459486R-B21 | Blade 5 is a ProLiant BL460c G1 with name: BRIO2
OK | 435458R-B21 | Blade 8 is a ProLiant BL460c G1 with name: XenServer06
OK | 406740-B21 | I/O module 1 is type noconnect: HP HP 1Gb Ethernet Pass-Thru Module for c-Class BladeSystem
OK | 437572-B21 | PSU 1 is Ok, output: 280 W
OK | 437572-B21 | PSU 2 is Ok, output: 224 W
OK | 437572-B21 | PSU 3 is Ok, output: 196 W
OK | 437572-B21 | PSU 4 is Ok, output: 128 W
OK | 437572-B21 | PSU 5 is Ok, output: 253 W
OK | 437572-B21 | PSU 6 is Ok, output: 265 W
-----------------------------------------------------------------------------
System Power Readings
=============================================================================
Total power consumption: 1346 W

Look at the first line. For me it looks like its the whole enclosure that needs to be replaced.

CRITICAL | 437504-B21 | Enclosure overall health condition is Failed

I hope someone out there knows what this means.

Regards Michael
Denmark
2 REPLIES
Albatross
Regular Advisor

Re: Power failure on C3000

Hi Michael,

Power and Fan seems to be OK, may be it is temperature-related...

May be you should login via the Onboard Administrator module and check the enclosure's status from there?

Also it is known that the Onboard Admin, server and ILO firmware should be updated for everything to work correctly, take a look in the HP Support Site for updated firmware files (specially in the ILO for each blade server...)

Hope it helps,

Albatross

Harritz
Occasional Visitor

Re: Power failure on C3000

Ive contacted HP and send them an showAll report.. Hopefully i will get status by the end of the week..

i'll get back to u all