BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant BL460c G1 MIBS

Simona Forgione
Occasional Contributor

ProLiant BL460c G1 MIBS

Hello,

I would like to monitor the status of ProLiant BL460c G1 physical disks but I can't find the right OID.
I found the right one for DL380 servers: .1.3.6.1.4.1.232.3.2.5.1.1.6 but it doesn't work for BL460c servers.
Which OID should I use and in which MIB can I find it?

Many thanks,
Simona
2 REPLIES
Adrian Clint
Honored Contributor

Re: ProLiant BL460c G1 MIBS

Simona,

You'll probably find someone in the SIM forum who can answer this quicker.

http://forums13.itrc.hp.com/service/forums/categoryhome.do?categoryId=455

The reason why is probably because the DL380 has a 400 series array controller and the BL460 has a 200 series.
Simona Forgione
Occasional Contributor

Re: ProLiant BL460c G1 MIBS

Thanks Adrian, I'm going to post in the SIM forum.

Bye