ProLiant BL465c G5 = Divide By Zero

[SteveD235]

When booting up ProLiant BL465c G5 blades OR I have experienced it with HP BL385 G2 2u Server I get a red screen with
Divide By Zero
EAX=000080C8 EBX=0000008B ECX=00000064 EDX=FFC0089
EBP-A0ED0E11 ESI=0000F80D EDI=0000F814
DS=0000 ES=0000 FS=0000 GS=0000
CS:EIP=1000:0000A141 SS:ESP=0030:0000FCDA
EFLAGS=00000813

When I encountered this problem on the BL385 the technician told me to upgrade the firmware. The Blades already have a resent firmware v1.70 and all the Blades are at the same firmware.

so far today 2 blades same problem, sometimes the server boots on the second try.

[SMR]

What you mention on your firmware revision is the iLO2 firmware, the system ROM had a recent update and between the fixes there is:

"Resolved an extremely intermittent issue that could cause the system to encounter a system boot hang with a red screen. "

The latest version is dated 2009.03.12 (B) (21 Apr 2009)

[Artx]

You chould update server firmware, it solves this problem:

http://www11.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c01718795-2